Floating Dock Framing Hardware

Floating Dock Hardware

Floating Dock Hardware

Floating Dock Hardware is designed to help maintain the structural integrity of wood framed floating docks that are subjected to the torquing motion of wind and waves. Unlike upland decks or fixed docks which can be fastened with screws and nails, a floating dock’s frame is subject to torsional stresses that require it to be bolted together.

Our framing brackets, hinges, and fasteners provide significant strength and rigidity to the dock frame, thereby adding longer life and increasing the utility of the floating dock. A strong frame will provide a stable platform onto which dock floats and decking materials may be fastened.

  • ¼” Thick Steel Construction
  • Hot-Dipped Galvanized for Maximum Corrosion Resistance
  • Assorted Male / Female Hinges for Connecting Dock Sections

In addition, a variety of piling hoops, piling guides, and pipe holders provide the means to secure your floating dock.

Filters
Availability
0 Selected Reset
Product type
0 Selected Reset
$ Price
The Highest Price is $47.53 Reset
$
to
$
View as:
  • Angle Bracket 2-1/2 Angle Bracket 2-1/2
    Angle Bracket 2-1/2" L x 5" H HDG
    Item # Angle-2.5x5
    • Commercial-Grade 1/4" Steel
    • Hot-Dipped Galvanized
    • Used to secure internal stringers to exterior frame and cross-supports.
    • Install using 1/2" carriage bolts.
    $5.49
  • Adjustable Angle Bracket 2-1/2
    Adjustable Angle Bracket 2-1/2" L x 5" H
    Item # Angle-2.5x5-Adj
    • Commercial-Grade 1/4" Steel
    • Hot-Dipped Galvanized
    • Slotted bracket helps resolve hole pattern conflicts.
    • Used to secure internal stringers to exterior frame and cross-supports.
    • Install using 1/2" carriage bolts.
    $5.05
  • Angle Clip 2.5
    Angle Clip 2.5" x 2.5" w/ Round Holes (For 1/2" Hex Bolt)
    Item # AngleClipR
    • Commercial-Grade 1/4" Steel
    • Hot-Dipped Galvanized
    • Used for framing connections where a standard angle bracket won't fit.
    • Install using 1/2" hex bolts.
    $3.05
  • Angle Clip 2.5
    Angle Clip 2.5" x 2.5" w/ Square Hole (For 1/2" Carriage Bolt)
    Item # AngleClipS
    • Commercial-Grade 1/4" Steel
    • Hot-Dipped Galvanized
    • Used for framing connections where a standard angle bracket won't fit.
    • Install using 1/2" carriage bolts.
    $3.05
  • Back-Up Plate 5 Back-Up Plate 5
    Back-Up Plate 5" x 5"
    Item # BP-5x5
    • Commercial-Grade 1/4" Steel
    • Hot-Dipped Galvanized
    • Used to reinforce T-Connectors and chain retainers.
    • Install using 1/2" carriage bolts.
    $4.94
  • Finger Deck Stabilizer Bracket 135° (Large)
    Finger Deck Stabilizer Bracket 135° (Large)
    Item # FDS-135
    • Commercial-Grade 1/4" Steel
    • Hot-Dipped Galvanized
    • Designed to help stabilize narrow finger piers.
    • Install using 1/2" carriage bolts.
    $17.37
  • Outside Corner Female-Female
    Outside Corner Female-Female
    Item # OC-FF
    • Commercial-Grade 1/4" Steel
    • Hot-Dipped Galvanized
    • Two sets of 1/2" thick female tabs.
    • Connects to male tabbed brackets with 3/4" pin.
    • Install using 1/2" carriage bolts.
    $40.88
  • Outside Corner Male-Female
    Outside Corner Male-Female
    Item # OC-MF
    • Commercial-Grade 1/4" Steel
    • Hot-Dipped Galvanized
    • One 3/4" thick male tab and two 1/2" thick female tabs.
    • Connects to male and female tabbed brackets with 3/4" pins.
    • Install using 1/2" carriage bolts.
    $40.18
  • Outside Corner Male-Male
    Outside Corner Male-Male
    Item # OC-MM
    • Commercial-Grade 1/4" Steel
    • Hot-Dipped Galvanized
    • Two 3/4" thick male tabs.
    • Connects to female tabbed brackets with 3/4" pins.
    • Install using 1/2" carriage bolts.
    $38.50
  • 4″ Pipe Holder for Docks - Hot Dipped Galvanized
    4″ Pipe Holder for Docks - Hot Dipped Galvanized
    Item # PH-4O
    • Commercial-Grade 1/4" Steel
    • Hot-Dipped Galvanized
    • 4" Pipe Holder bolts to outside of dock.
    • Use 3" steel pipe to hold dock in place.
    • Install using one pipe holder attachment kit Item # PH-AK.
    $32.52
  • Sold Out
    Male T Connector
    Item # T-ConM
    • Commercial-Grade 1/4" Steel
    • Hot-Dipped Galvanized
    • One 3/4" thick male tab.
    • Connects to female tabbed brackets with 3/4" pin.
    • Install using 1/2" carriage bolts.
    $24.74
  • Washer Plate 1-1/2 Washer Plate 1-1/2
    Washer Plate 1-1/2" x 5"
    Item # W-1.5x5
    • Commercial-Grade 1/4" Steel
    • Hot-Dipped Galvanized
    • Use two washer plates to reinforce each angle bracket.
    • Install using 1/2" carriage bolts.
    $1.85
  • Outside Corner Female Outside Corner Female
    Outside Corner Female
    Item # OC-F
    • Commercial-Grade 1/4" Steel
    • Hot-Dipped Galvanized
    • Two 1/2" thick female tabs.
    • Connects to male tabbed brackets with 3/4" pin.
    • Install using 1/2" carriage bolts.
    $33.79
  • Outside Corner Male Outside Corner Male
    Outside Corner Male
    Item # OC-M
    • Commercial-Grade 1/4" Steel
    • Hot-Dipped Galvanized
    • One 3/4" thick male tab.
    • Connects to female tabbed brackets with 3/4" pin.
    • Install using 1/2" carriage bolts.
    $31.28
  • Inside Corner Pipe Holder 3 Inside Corner Pipe Holder 3
    Inside Corner Pipe Holder 3"
    Item # PH-3IC
    • Commercial-Grade 1/4" Steel
    • Hot-Dipped Galvanized
    • Inside Corner Bracket with welded 3" x 12" pipe.
    • Use 2" steel pipe (not included) to hold dock in place.
    • Install using 1/2" carriage bolts.
    $47.53
  • Pipe Holder Outside 3 Pipe Holder Outside 3
    Pipe Holder Outside 3"
    Item # PH-3O
    • Commercial-Grade 1/4" Steel
    • Hot-Dipped Galvanized
    • 3" Pipe Holder bolts to outside of dock.
    • Use 2" steel pipe to hold dock in place.
    • Install using one pipe holder attachment kit Item # PH-AK.
    $31.38
  • Outside Corner End Outside Corner End
    Outside Corner End
    Item # OC-E
    • Commercial-Grade 1/4" Steel
    • Hot-Dipped Galvanized
    • Used at the ends of docks and fingers.
    • Install using 1/2" carriage bolts.
    $18.93
  • Inside Corner Bracket Inside Corner Bracket
    Inside Corner Bracket
    Item # ICL
    • Commercial-Grade 1/4" Steel
    • Hot-Dipped Galvanized
    • Used with all outside corner brackets.
    • Install using 1/2" carriage bolts.
    $21.47
  • Splice Plate 5
    Splice Plate 5" x 25" HDG
    Item # SP-5x25
    • Commercial-Grade 1/4" Steel
    • Hot-Dipped Galvanized
    • Used to join dock sections or timber together.
    • Install using 1/2" carriage bolts.
    $31.69