Waterfront Construction
Solutions Built to Last
Floats, cleats, dock boxes, piling caps, hardware, bumpers and
10,000+ marine-grade parts. Ships within 1 business day from our
USA warehouse.
Over 10,000 marine-grade parts
Free material estimates and drawings
Ships within 1 business day from our USA warehouse.
Shop All
From a single piling cap to a full commercial build — same fast shipping, same expert support, whether you're a weekend DIYer or a marine contractor.
-
In Stock
Angle Bracket 2-1/2" L x 5" H HDGUse this heavy duty 2-1/2" x 5" angle at the ends of stringers and internal blocking connections. 3-1/2" on...
$5.49 -
In Stock
Adjustable Angle Bracket 2-1/2" L x 5" HUse this heavy duty 2-1/2" x 5" angle where hole pattern conflict prohibits using a standard angle. 3-1/2" ...
$5.05 -
In Stock
Angle Clip 2.5" x 2.5" w/ Round Holes (For 1/2" Hex Bolt)Use this heavy duty 2.5" x 2.5" angle clip for connections where a standard angle bracket won't work. Insta...
$3.05 -
In Stock
Angle Clip 2.5" x 2.5" w/ Square Hole (For 1/2" Carriage Bolt)Use this heavy duty 2.5" x 2.5" angle clip for connections where a standard angle bracket won't work. Insta...
$3.05 -
In Stock
Back-Up Plate 5" x 5"5" x 5" back-up plates are used to reinforce T-Connectors, chain retainers, or finger deck stabilizers. 3-1...
$4.94 -
In Stock
Finger Deck Stabilizer Bracket 135° (Large)Finger deck stabilizer brackets are designed to help stabilize narrow finger piers. By flaring out narrow f...
$17.37 -
In Stock
Outside Corner Female-FemaleBoth legs have two 1/2" welded tabs (female). Connect to (2) male tabs. 3-1/2" on-center hole pattern. Inst...
$40.88 -
In Stock
Outside Corner Male-FemaleHas one 3/4" welded tab (male) and two 1/2" welded tabs (female). Connect to (1) female tab set and (1) mal...
$40.18 -
In Stock
Outside Corner Male-MaleBoth legs each have one 3/4" welded tab (male). Connect to (2) female tab sets. 3-1/2" on-center hole patte...
$38.50 -
In Stock
4″ Pipe Holder for Docks - Hot Dipped GalvanizedPipe holder bolts to outside of dock. Use 3" steel pipe (not included) to hold dock in place. Pipe measures...
$32.52 -
In Stock
Washer Plate 1-1/2" x 5"Use two washer plates with each framing angle. 3-1/2" on-center hole pattern. Install using 1/2" carriage b...
$1.85 -
In Stock
Outside Corner FemaleHas two 1/2" welded tabs (female) for a 3/4" pin. Connect to a male tab. 3-1/2" on-center hole pattern. Ins...
$33.79 -
In Stock
Outside Corner MaleHas one 3/4" welded tab (male) for a 3/4" pin. Connect to a female tab set. 3-1/2" on-center hole pattern. ...
$31.28 -
In Stock
Inside Corner Pipe Holder 3"Inside Corner with 3" x 12" pipe. Accommodates 2" steel pipe to hold dock in place. Install using 1/2" carr...
$47.53 -
In Stock
Pipe Holder Outside 3"Pipe holder bolts to outside of dock. Use 2" steel pipe (not included) to hold dock in place. Pipe measures...
$31.38 -
In Stock
Outside Corner EndThe outside corner end is used at the ends of docks and fingers. 3-1/2" on-center hole pattern. Install usi...
$18.93 -
In Stock
Inside Corner BracketThis heavy duty inside corner should be used with an outside corner. Elongated mounting holes fit up to sin...
$21.47 -
In Stock
Splice Plate 5" x 25" HDG5" x 25" splice plate used to join dock sections or timber together. Each plate can be mated with two insid...
$31.69
Ready to build?
Every dock starts with a parts list. Yours starts here.