Gangway Hinge Setup
(Single Hinge)
Made for use with 2x6 stringers and 5/4 decking. ¾” bolt set is included. Install using 3/8” bolts or lags.

HD Special Seawall Bracket (Male)
Outside corner reverse male seawall brackets are designed to attach wooden gangways to the seawall cap. The 3/4" welded tab is designed to mate up to a standard outside corner female bracket. Each leg measures 10"L x 5" H. Install using 1/2” bolts.

HD Outside Corner (Female)
Has two ½” welded tabs. Each Leg is 10”L x 5” H.  Install using ½” carriage bolts.

Inside Corner
This heavy duty inside corner should be used with one of the outside corners. Each leg has elongated holes for easy fit-up and is 8-1/2”L x 5”H.  Install using ½” bolts.

Back-Up Plates
5” x 5” reinforcing plates are used to back up the single T males and females
Install using ½” carriage bolts.

1/2 x 3 Carriage Bolt Set
Used to attach outside corners, inside corners, T-Connectors and 3" pipe holders to wood docks. 1/2" x 3" bolt, flat washer and nut. Hot dip galvanized.

1/2 x 4-1/2 Carriage Bolt Set
Used to attach outside corners, inside corners, T-Connectors and 3" pipe holders to wood docks. 1/2" x 4-1/2" bolt, flat washer and nut. Hot dip galvanized.